Professinal at LED display production & business more than 12 years !

Home ProductsOutdoor Advertising LED Displays

1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof

1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof

  • 1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof
  • 1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof
  • 1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof
1/4 Scan Outdoor Advertising LED Displays P8 IP65 Waterproof
Product Details:
Place of Origin: Shenzhen,China
Brand Name: X-media
Certification: CE/ROHS/ISO/CB/SASO/TUV/FCC/UL
Model Number: P8
Payment & Shipping Terms:
Minimum Order Quantity: 5sq.m
Price: Negotiation
Packaging Details: Flight case, wooden case and carton box and foam package
Delivery Time: 8~10 working days
Payment Terms: T/T, MoneyGram,Cash
Supply Ability: 5,000sq.m/month
Contact Now
Detailed Product Description
Product Name: Advertising Led Screen Led Display Board Cabinet Material: Iron
Module Size: 320mmx160mm Screen Dimension: Customized Design
Brightness: >5500cd Warranty: 5 Years
Life Span: 100,000hours MTBF: 10000H
High Light:

P8 Outdoor Advertising LED Displays

,

1/4 Scan Outdoor Advertising LED Displays

,

p8 outdoor led screen

Advertising Building LED Screens P8 Outdoor Full Color 1/4 Scan IP65 Waterproof

 

Hardware installation

1. Insert the DVI display card into the AGP slot of the motherboard and install the driver for the card.

2. Insert the data acquisition card into an empty PCI slot.

3. Link the data acquisition card to the display card with a DVI cable.

4. Connect the control line to the serial port  (optional).

5. Connect to the receiving card with a network cable.

6. The LED display shows that the drive card and the hub are connected in a one-to-one correspondence with 50P flat wires.

7. Check and set up or power on debugging.

 

Specification of product:

outdoor P8 LED screen Display
Resolution/mm 8
Pixel configuration 1R1G1B
Pixel density/pixels/m² 15625/square meter
Module resolution 40*20
Module size/mm 320*160mm
View distance 14-300m
Single point brightness adjust Can be added
Single point color adjust Can be added
White balance brightness >5500cd/square meter
Color temperature 6500K-9500K
Horizontal view angle 120(degrees)
Vertical view angle 60(degrees)
Signal Process bit 10 or 16bit
Grey process 1024x1024x1024 16834x16834x16834 65536x65536x65536
Control distances Internet cable:100m, multimembrane:500m, monofilm:2km
Driving mode Constant driving current
Scanning mode static full color SCANNING
Fresh rate 60Hz
Refresh frequency >3000Hz
Control mode Computer synchronous
Brightness adjusted range Manual, automatic operation, stepless continuous adjusted
255 steps. No grey loss
Out of control point <1/10000
Working hours ≥72hours
Mean Time Between Failure >5000hours
Life time 100000hours
Life-all-white(brightness halving) 50000hours
Environment temperature range Operating temperature range: -20-45℃
Self-check technology LED spot self-check, communications check, power check,
temperature monitor(need customization)
Remote monitoring Remote supervision and control, record potential fault,
send out warning signs to the operators.(need customization)
Software environment WindowsNT,Windows1999,WindowsXP
Luminous point width between centres Deviation<3%
Brightness uniformity <10%
Waterproof IP65
Color uniformity(chromaticity coordinate) ±0.003
Power supply request AC85-264V(50Hz-60Hz)
Contrast (1000:1)
System protection Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration
Humidity(working) working:10-95%
Humidity(storing) storing:10-95%

 

Packing and shipping:

In our company,usually use the wooden and flight cases for package,wooden for Iron cabinet,and the flight for Die casting cabinet.In this way can help you to save the transportation expenses.For shipping,we have sea and air,in which way just all up to you.Also,if you want other way,we can accept.

Two types of modules:

A. DIP package
DIP package, which is the abbreviation of dual inline-pin package, commonly known as plug-in type. It was the first to develop. The LED lamp bead is produced by the manufacturer, and then inserted into the LED lamp board of the LED by the LED module and the LED display manufacturer, and the DIP semi-outdoor module and the outdoor waterproof module are produced through wave soldering.
However, due to the influence of the diameter of the lamp bead, only P6 can be achieved at present. Other P5, P4 and even higher density outdoor LED displays cannot be made. However, the protection performance of the direct insertion is good, but the viewing angle is not accurate and fixed, generally between 100-110, and the energy consumption is high, and it is not environmentally friendly, so it is only suitable for outdoor small-pitch LED display, and currently in the outdoor P10-P20 Have a large market share.
Moreover, it is produced by DIP packaging, the process is complicated, it is not easy to mechanize production, and the production efficiency is low. In addition, there are many DIP manufacturers, there is no high technical and equipment threshold, and the competition is fierce. Many manufacturers use inferior raw materials and PCB boards to reduce the cost to gain market share, low quality, and almost no perfect after-sales guarantee.

B. SMD package
SMD package, meaning: surface mount device, which is one of the SMT components. Surface mount components were introduced about twenty years ago and have opened up a new era. For a long time it has been thought that all pin components will eventually be available in SMD packages. SMD technology is widely used in LED outdoor displays.
We often say that the three-in-one label is actually a kind of SMD technology, which means that the SMT lamps of RGB three different color LED chip packages are packaged in the same glue body at a certain interval.
The advantages of the standard three-in-one outdoor full-color LED display are as follows: the full-screen viewing angle is relatively large, and the surface can be treated with light diffuse reflection. The obtained effect is not granular, the color saturation is high, and the color uniformity is good. . The overall flatness of the three-in-one is easier to control and has always been the standard technology used in high-definition outdoor LED displays.
With the continuous improvement of technology development and production technology in recent years, SMD has developed rapidly and cost reduced. It is currently the mainstream product of LED indoor display. Moreover, it has developed rapidly in the outdoor market, but brightness and waterproof and moisture-proof have always been difficult to overcome. I believe that the entire industry continues to develop, the development of outdoor LED display is the direction of the surface.

 

Anti Corrosion Advertising LED Screens P8 Outdoor Full Color 1/4 Scan Mode HD 0

 

Anti Corrosion Advertising LED Screens P8 Outdoor Full Color 1/4 Scan Mode HD 1

 

Contact Info:

Sales Engineer Jason Hu
Mob +86 135 38053596
Whatsapp +86 135 38053596
Skype peter.huliming27
Email jason.hu@sovalueled.com

 

 

 

 

Contact Details
Shenzhen Xmedia Technology Co.,Ltd

Contact Person: Jason Hu

Tel: 13538053596

Send your inquiry directly to us
Other Products