|
Product Details:
|
| Product Name: | Outdoor Full Color LED Display Big TV Advertising Screen | Cabinet Material: | Iron |
|---|---|---|---|
| Module Size: | 192mmx192mm | Screen Dimension: | Customized Design |
| Brightness: | >5500cd | Warranty: | 5years |
| Life Span: | 100,000hours | MTBF: | 10000H |
| High Light: | P6 Commercial LED Display Screen,9500K Exterior Advertising Display,6500K p6 led display |
||
LED Display P6 LED Digital Stadium Screen For Advertising
Specifications :
| Outdoor SMD P6 | |||||
| Resolution/mm | 6mm | ||||
| Pixel configuration | 1R1G1B | ||||
| Pixel density/pixels/m² | 27777/m² | ||||
| Module resolution | 32X32 | ||||
| Module size/mm | 192x192mm | ||||
| View distance | 6-300m | ||||
| Single point brightness adjust | Can be added | ||||
| Single point color adjust | Can be added | ||||
| White balance brightness | >5500cd/㎡ | ||||
| Color temperature | 6500K-9500K | ||||
| Horizontal view angle | 120(degrees) | ||||
| Vertical view angle | 60(degrees) | ||||
| Signal Process bit | 10 or 16bit | ||||
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 | ||||
| Control distances | Internet cable:100m, multimembrane:500m, monofilm:2km | ||||
| Driving mode | Constant driving current | ||||
| Scanning mode | 1/8 SCANNING | ||||
| Frame rate | 60Hz | ||||
| Refresh frequency | >1200Hz | ||||
| Control mode | Computer synchronous | ||||
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted | ||||
| 255 steps. No grey loss | |||||
| Out of control point | <1/10000 | ||||
| Working hours | ≥72hours | ||||
| Mean Time Between Failure | >5000hours | ||||
| Life time | 100000hours | ||||
| Life-all-white(brightness halving) | 50000hours | ||||
| Environment temperature range | Operating temperature range: -20-45℃ | ||||
| Self-check technology | LED spot self-check, communications check, power check, | ||||
| temperature monitor(need customization) | |||||
| Remote monitoring | Remote supervision and control, record potential fault, | ||||
| send out warning signs to the operators.(need customization) | |||||
| Software environment | WindowsNT,Windows1999,WindowsXP | ||||
| Luminous point width between centres | Deviation<3% | ||||
| Brightness uniformity | <10% | ||||
| Color uniformity(chromaticity coordinate) | ±0.003 | ||||
| Power supply request | AC85-264V(50Hz-60Hz) | ||||
| Contrast | (1000:1) | ||||
| System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration | ||||
| Humidity(working) | working:10-95% | ||||
| Humidity(storing) | storing:10-95% | ||||
Led display introduction:
1) High intensity and can be adjusted, so can meet the request of the customers according the application environment. 2) Best equality, commendably solve the problem of the mosaic, have the excellent consistency of light 3) To pictures and character, have clear, exquisite and real display effect 4) Big viewing angle to 110 degree at horizontal line, 60 degree at vertical line, you can see at every angle at this range, no picture change, no color excursion 5) Can repair each led lamps, so the cost of maintain is lower, and easy to repair.
Products Advantages:
1) Price Advantage: we have the best competitive price at the market, also have the same even better quality. 2) Performance Advantage: Best Equality, high consistency, Big viewing angle, can repair each led lamps 3) Quality advantage: From material to finished product, from design to produce, we control all steps, that's the guarantee of the quality and reliability. 4) Service advantage: Better service at same situation, better cooperation at same service!
Products application area:
1) Full color LED display : Equally or compactly make the red, green, blue color in one dot, equally distribute at the panel, so make the whole display 2) Usually apply for physical sports, advertisement, bank, stock exchange, station, port, marketplace, telecommunication, department, school, monitor, restaurant, entertainment
Product Description
Installation Way
Remark:
1.The Mosaic: suitable for smaller indoor screen. Due to the small space, in order to do not take up space, according to the screen size on the wall to dig out the area of the same size, the LED display embedded in the wall. Wall for the solid wall. With the method of before the maintenance, the cost is higher.
2. The wall: more suitable for the installation of indoor LED display, smaller (below 10 square meters), wall is solid walls, hollow bricks or simple retaining wall are not suitable for the installation.
3. Hanging: more suitable for the station LED display, LED display at the airport and other places of large signage. Request screen area is lesser. (below 10 square meter) requirements and must have the appropriate installation location, such as beams or columns above, and the screen body in general to add back cover.
4. Pillar type: used for the installation of outdoor advertising LED display, eye shot is open, around the place empty, such as square, parking lot, etc. According to the size of the screen area and can be divided into the installation of single column and double column type.
5. Roof type: mainly applied to outdoor advertising LED display, the installation location is mainly the roof of the building, with the increase of building height to consider windproof level along with the increase.
What are the considering factors of the Outdoor LED display screen?
Main questions of outdoor led display as below:
(1)display installed in the outdoor, solarization and drench, blow and dust, bad working environment, electrical equipment being wringing and damp will cause short circuit, even fire, cause conk out, even fire, result in loss.
(2)the display may be attacked by the strong electromagnetism made by the thunder and lighting.
(3)The big change of the environment temperatures. The Operating LED display will emit a lot of heating, if the environment temperature is too high, the molectron of the LED screen maybe operating un-normally to damage for its bad giving heating out, finally the LED display system will not operate normally as usual.
(4)The display has a wide range of angle, long viewing distance, big change of the environment light, especially the direct to the sunshine.
With these special requirements, the outdoor LED displays needed:
(1) The parts connecting the body of the LED display with the building must be waterproof and anti-leaking strictly as the display. The display must have the measurements for water giving out. Once leaked, it will be given out smoothly.
(2) The lightning rod should be installed on the LED display or the building. The body and the frame of the display must to keep connecting with the earth, the resistor of the earth wire should under 3 Q , so as to the heavy current from lightning can be discharged in time.
(3) Install the ventilator equipment to lower the temperature, keep the inner cabinet temperature in the range of -10 ~ 40 centigrade degree. The back top of the display must install the rolling electronic fans to give the heating out.
(4) Choose the industrial using IC with the working temperature range of -10 ~ 40 centigrade degree for fear the LED display can not start in the low temperature of the winter.
(5) To be seen form a long distance in the high brightness environment, it must be using the extra high brightness LED lamps.
(6) Choosing the new large angle LED lamps as medium, the LED display will have a larger angle, vivid colors, consistent operation and a long life of more than 100 thousand hours. The medium has a popular package with the hat-edge and square shape in cylinder, sealed by Silicon glue, assembly without metal. Also the display has an unique exterior outface, solid and durable, has the characteristics of anti-dazzle, waterproof, impurity proof, protection from high temperature and short circuit.
Welcome to visit our website and inquire us more info,waiting for you all the time!!!
Contact Person: lee
Tel: +86-13825238798
Fax: 86-755-2935-1706
